CCTREE 1.75mm Red PLA filament - 1kg

CCTREE Red PLA is a biodegradable filament made from renewable 100% virgin materials (corn or starch). Free from impurities, it produces good quality prints while reducing the risk of clogging. It is a non-harmful budget filament ideal for both hobbyists and makers. With a low printing temperature, it can be used on any 3D printer granting stable performance. No heated bed required.

CCTREE Red PLA flows smoothly and can be easily shaped. It produces strong and stable prints with minimal warping or stringing. It is particularly suitable for creating large, rigid objects with a glossy surface finish. The filament section is perfectly round and uniform. It measures 1.75mm with a tolerance of ± 0.03mm. Its accuracy prevents jammings and kinks. The material is tough, strong and wear-resistant. It is characterized by a low shrinkage rate and optimum layer bonding. The products printed with CCTREE Red PLA will solid surfaces with bright colors and crisp edges.

By purchasing the CCTREE Red PLA filament, you will get a well-packaged 1kg spool stored in a vacuum-sealed bag with a desiccant for a pretty good price. If properly stored, the filament lasts for over a year. Red PLA has been used to produce a variety of models adding an artistic twist to each creation.

Specifications

CCTREE Red PLA technical data

• Printing temperature: 190 - 220 °C
• Heated bed temperature: 0 - 50°C
• Filament density: 1.25 g/cm³ 
• Tensile Strength: 85 MPa
• Flexural Strength: 97 MPa
• Flexural Modulus: 3,600 MPa
• IZOD Impact Strength: 3 KJ/㎡

Spool specs

• Filament diameter: 1.75mm
• Dimensional Accuracy: ± 0.03mm 
• Spool size: Ø 195mm - 55mm inner hub - 60 mm height
• Spool weight: 1kg
• Color name: Red 
• Color attribute: Solid

The CCTREE Red PLA is sold in 1kg spools. It comes vacuum-sealed with desiccant.